Our Technologies!
Everything in one place
US$ 2,149.00
All prices are Region Specific. Thus they are not easily comparable.
Please do not take it personal if your region is more or less expensive.
There are a lot of parameters that play into those.
If you have any questions about this, please feel free to message us
thru the chat on the bottom right.
THE WAVE 1 excels in down-the-line wave conditions, staying loose with controllable grip in side-on to side-off conditions.
“I designed this board as my personal everyday waveboard and it is my favorite board in any down-the-line conditions from Santa Cruz to Pistol River to Hookipa. The Wave I combines a parallel mid-section with a subtle hip through the stance to allow radical carving turns in the wave's pocket. The bottom shape is single concave through the stance for increased grip during carving turns while adding a rocker along the rail line to keep things loose. The diamond tail shortens the rail line while providing enough area behind the back foot for stability.” - Jonah Lepak Designer
Down-the-line wave: 10
Onshore wave: 9
Bump & Jump: 7
Feel: Modern/technical - Balanced front/back footed
Good down the line waves from shoulder high to over mast-high.
Intermediate to Pro.
Good for a waveboard, not the fastest, not the slowest.
Excellent for float and ride conditions under an experienced rider, volume distribution allows relaxed slogging and it rides small for its volume.
Basically the board that I want to ride almost every day.
A bit more technical to ride than some boards and fin setup is critical to the best performance.
A somewhat pulled-in nose leads to a short parallel midsection that is broken by a hidden hip starting at the front strap to a moderate width diamond tail.
Very soft tucked rails in the nose area with a release edge starting forward of the front strap and remaining tucked to the back strap.
Moderate wave-rocker with continuous curve through the stance and the tail.
Flat from the nose to the stance with single concave through the stance and flat/slight vee out the tail. This adds rocker through the stance for a grippy feeling between the feet and the flat/vee out the tail for release.
Moderate domed deck with thickness flow biased forward to keep a balanced forward stance in sub-planing conditions.
Quad setup, the recommended position is rear fins directly under the back foot and about a 4cm gap from the front of the back fins to the back of the front fins. The board has a lot of built-in grip and too much front fin can make it too grippy; if more fin is needed, I always recommend sizing up the rear fins first.
The latest iteration in my 30 year quest for the best waveboard possible!