Outline

Because this is more of a Pro model we made the shape based on performance and not stability. (The standard foil SUP shape is the go to for stability) It has a pulled in nose and tail to help reduce the chance of catching edges when surfing and pushing less water on take off.

Rails

The rails are big and fat to stop the rail catching and steering you on touchdowns.

Rocker

The rocker on this board is a little lower than previous models but the new shape deck allows the nose to smoothly go underwater if it needs to and flow back out without pushing a heap of water.

Bottom

Starting at the nose we have a very round bottom which quickly flows into a quad concave with the outer points of concaves higher than the inside (almost like 4 vee concaves) causing water to flow and release off the lower points for a very smooth transition from being in the water to foiling with no huge speed jump like a flat bottom board does when the whole thing separates at the same time. The back third has the Box area which has been set to the correct angle to the standing area so the board around it can have some rocker. The tail has a huge vee so when you're pumping downwind and catch a bit of chop on the tail it doesn’t become an instant hand brake. The water just sprays off to the sides. 

Deck

We have a concave deck to get the rider as close to the foil as possible while maintaining the volume needed. It's a soft concave without any drastic edges so it doesn't trap water on the deck after takeoff.   

If you want a board to cross over to all disciplines of foiling then this is definitely one to look at.